Islamabad Car Mechanic — Doorstep & Workshop Auto Repair Services

Suzuki Bolan having trouble starting on CNG

CNG Bolans often need petrol to start on cold mornings, especially with worn plugs or a weak ignition coil. Below are the causes that fit a Suzuki Bolan, most likely first, and what fixes each one.

Why a Suzuki Bolan is having trouble starting on CNG

0.8 L F8B three-cylinder petrol

Likely causeHow likelyThe fix

Weak spark plugsFits the Bolan

CNG needs higher ignition energy; worn plugs fail to light it. Plug inspection confirms it.

CommonSpark plug replacement

Faulty reducer or solenoidFits the Bolan

A worn reducer or sticking solenoid gives too little or too much gas. Kit inspection confirms it.

CommonCng kit inspection

Poor kit tuningFits the Bolan

Wrong mixer or timing settings cause hard starts. Tuning restores it.

CommonCng kit inspection

Weak ignition coilsFits the Bolan

Coils that work on petrol can fail under CNG load. Coil testing confirms it.

PossibleIgnition coil replacement

Cold weather start on gasFits the Bolan

Cold reducers struggle in winter; starting on petrol avoids it. Reducer coolant hoses are checked.

PossibleCng kit inspection

Low compression on older enginesFits the Bolan

Worn engines lose compression and struggle more on CNG. Compression tests confirm it.

PossibleEngine diagnosis

Weak battery

Slow cranking is harder on CNG. Battery testing confirms it.

PossibleBattery testing

Causes marked “Fits the Bolan” apply because of how this car is built: its petrol engine, MANUAL gearbox, timing belt or a CNG conversion.

General guidance based on how these cars are built and how they commonly wear. Your car’s own history matters more than any list, which is why a technician confirms the cause before quoting.

Can you keep driving?

Usually yes on petrol. If you smell gas, close the cylinder valve and do not drive until checked.

Checks you can do first

  • Check cylinder pressure gauge.
  • Try starting on petrol and switching to CNG once warm.
  • Smell for gas leaks around the kit.

How a technician diagnoses it on a Bolan

  1. Step 1

    Inspect spark plugs and coils.

  2. Step 2

    Check reducer, solenoid and pressures.

  3. Step 3

    Test compression and battery.

  4. Step 4

    Retune the kit if needed.

Parts usually involved

Get your Bolan looked at

Tell us the Suzuki Bolan, the symptom and where the car is. A person calls back to say what we can do in your city and what the diagnosis costs.

  1. 1
  2. 2
  3. 3

No payment now. We confirm the price before work starts.

Before you book

Questions we get asked

If your question is not here, ask it. We would rather answer honestly now than have you find out after booking.

Chat on WhatsAppBook a Mechanic