MG HS losing power
On a MG HS, this usually comes down to turbo or boost leak or transmission slip or limp mode. Below are the causes that fit this car, most likely first, and what fixes each one.
Why a MG HS is losing power
1.5 L turbo petrol · 1.5 L turbo plug-in hybrid
| Likely cause | How likely | The fix |
|---|---|---|
Turbo or boost leakFits the HS A split intercooler hose or worn turbo loses boost and triggers limp mode. Boost readings on a scan confirm it. | Common | Engine diagnosis |
Transmission slip or limp modeFits the HS Worn or overheated CVT and automatic gearboxes slip, so revs rise without speed. Transmission codes and fluid condition show it. | Possible | Transmission diagnosis |
Clogged air filter Dusty roads choke the filter quickly and starve the engine of air. Visual inspection shows it. | Common | Air filter replacement |
Restricted fuel filter or weak pump Poor fuel quality clogs filters and strains pumps, so power fades under load. Fuel pressure testing confirms it. | Common | Fuel pump replacement |
Blocked catalytic converter A melted or clogged converter restricts the exhaust and power falls at higher revs. Back-pressure testing confirms it. | Possible | Catalytic converter diagnosis |
Faulty oxygen or airflow sensor Wrong sensor readings upset the mixture. Live data and fuel trims show the faulty sensor. | Possible | Sensor testing |
Causes marked “Fits the HS” apply because of how this car is built: its petrol/hybrid engine, DCT/AUTOMATIC gearbox, timing chain.
General guidance based on how these cars are built and how they commonly wear. Your car’s own history matters more than any list, which is why a technician confirms the cause before quoting.
Can you keep driving?
Short gentle trips are usually fine if power loss is mild. If the car is in limp mode, overheating, or the check engine light is flashing, stop and get it checked.
Checks you can do first
- Check whether any warning light is on.
- Check the air filter for heavy dust.
- Note whether the loss is constant or only uphill, hot, or on CNG.
- Check the temperature gauge.
How a technician diagnoses it on a HS
Step 1
Scan for codes, limp mode and fuel trims.
Step 2
Check air filter, fuel pressure and, on turbo engines, boost.
Step 3
Test exhaust back-pressure for a blocked converter.
Step 4
Road test to separate engine power loss from transmission or clutch slip.
Other MG HS problems
- HS draining its batteryWidely reported on this model
- HS jerking through its automatic gearboxWidely reported on this model
- HS losing turbo boostWidely reported on this model
- HS not starting
- HS showing a check engine light
- HS squeaking when braking
- HS having a soft brake pedal
- HS knocking from the engine
- HS blowing white smoke
Parts usually involved
Loss of power on other cars
Get your HS looked at
Tell us the MG HS, the symptom and where the car is. A person calls back to say what we can do in your city and what the diagnosis costs.
Before you book
Questions we get asked
If your question is not here, ask it. We would rather answer honestly now than have you find out after booking.



