Proton X70 showing the airbag warning light
On a Proton X70, this usually comes down to deployed or removed parts after an accident or fitted seat covers blocking side airbags. Below are the causes that fit this car, most likely first, and what fixes each one.
Why a Proton X70 is showing the airbag warning light
1.8 L turbo petrol
| Likely cause | How likely | The fix |
|---|---|---|
Deployed or removed parts after an accidentFits the X70 Imported or repaired cars sometimes have airbags or modules not properly replaced. Crash data stored in the module and inspection reveal it. | Possible | Accident repair |
Fitted seat covers blocking side airbagsFits the X70 Seats with side airbags need compatible covers; some covers also disturb occupant sensors. Inspection and codes confirm it. | Possible | Abs airbag diagnosis |
Loose seat or seatbelt connector Connectors under the front seats get pulled when seats move or are removed for cleaning. The scan shows a high-resistance fault in that circuit. | Common | Abs airbag diagnosis |
Faulty crash sensor or wiring Front crash sensors sit low in the bumper area and suffer from water and minor knocks. Circuit tests locate the fault. | Possible | Wiring repair |
Low battery voltage during cranking A weak battery can log temporary SRS faults. They return as history codes and clear once the battery is sorted. | Less common | Battery testing |
SRS control module fault A module that has stored crash data or failed internally keeps the light on. Scan tools show module-internal codes. | Less common | Ecu repair |
Causes marked “Fits the X70” apply because of how this car is built: its petrol engine, AUTOMATIC/DCT gearbox, timing chain.
General guidance based on how these cars are built and how they commonly wear. Your car’s own history matters more than any list, which is why a technician confirms the cause before quoting.
Can you keep driving?
The car will drive, but you should assume the airbags will not work in a collision. Get it diagnosed soon and do not try to remove airbag parts yourself.
Checks you can do first
- Note whether the horn or steering buttons also stopped working, which points to the clock spring.
- Check whether the light came on after a seat was moved, removed or a seat cover fitted.
- Ask whether the car has had accident repair or a steering wheel change.
- Do not unplug yellow SRS connectors yourself.
How a technician diagnoses it on a X70
Step 1
Read SRS codes with a scanner that supports the airbag module.
Step 2
Disconnect the battery and wait as the manual specifies before touching SRS parts.
Step 3
Check seat, seatbelt and clock spring circuits for resistance faults.
Step 4
Inspect crash sensors and harnesses, then clear codes and confirm the light stays off.
Other Proton X70 problems
- X70 AC not coolingWidely reported on this model
- X70 draining its batteryWidely reported on this model
- X70 losing turbo boostWidely reported on this model
- X70 showing a check engine light
- X70 knocking from the engine
- X70 leaking oil
- X70 jerking through its automatic gearbox
- X70 losing power
- X70 clicking when turning
Airbag warning light on other cars
Get your X70 looked at
Tell us the Proton X70, the symptom and where the car is. A person calls back to say what we can do in your city and what the diagnosis costs.
Before you book
Questions we get asked
If your question is not here, ask it. We would rather answer honestly now than have you find out after booking.



