Islamabad Car Mechanic — Doorstep & Workshop Auto Repair Services

Airbag warning light

An airbag (SRS) light means the system has found a fault and the airbags and seatbelt pretensioners may not deploy in a crash. The car drives normally, which is why it is easy to ignore. Common causes are seat connectors, the clock spring behind the steering wheel, and previous accident repairs; it needs a proper SRS scan.

Get it checked soon

Likely causes

Likely causeHow likelyThe fix

Loose seat or seatbelt connector

Connectors under the front seats get pulled when seats move or are removed for cleaning. The scan shows a high-resistance fault in that circuit.

CommonAbs airbag diagnosis

Worn clock springSome cars only

The ribbon cable behind the steering wheel breaks after many turns, often with horn failure. Codes for the driver airbag circuit confirm it.

CommonAbs airbag diagnosis

Deployed or removed parts after an accidentSome cars only

Imported or repaired cars sometimes have airbags or modules not properly replaced. Crash data stored in the module and inspection reveal it.

PossibleAccident repair

Fitted seat covers blocking side airbagsSome cars only

Seats with side airbags need compatible covers; some covers also disturb occupant sensors. Inspection and codes confirm it.

PossibleAbs airbag diagnosis

Faulty crash sensor or wiring

Front crash sensors sit low in the bumper area and suffer from water and minor knocks. Circuit tests locate the fault.

PossibleWiring repair

Low battery voltage during cranking

A weak battery can log temporary SRS faults. They return as history codes and clear once the battery is sorted.

Less commonBattery testing

SRS control module fault

A module that has stored crash data or failed internally keeps the light on. Scan tools show module-internal codes.

Less commonEcu repair

General guidance based on how these cars are built and how they commonly wear. Your car’s own history matters more than any list, which is why a technician confirms the cause before quoting.

Can you keep driving?

The car will drive, but you should assume the airbags will not work in a collision. Get it diagnosed soon and do not try to remove airbag parts yourself.

Checks you can do first

  • Note whether the horn or steering buttons also stopped working, which points to the clock spring.
  • Check whether the light came on after a seat was moved, removed or a seat cover fitted.
  • Ask whether the car has had accident repair or a steering wheel change.
  • Do not unplug yellow SRS connectors yourself.

How a technician diagnoses it

  1. Step 1

    Read SRS codes with a scanner that supports the airbag module.

  2. Step 2

    Disconnect the battery and wait as the manual specifies before touching SRS parts.

  3. Step 3

    Check seat, seatbelt and clock spring circuits for resistance faults.

  4. Step 4

    Inspect crash sensors and harnesses, then clear codes and confirm the light stays off.

By car model

Warning lights and codes linked to it

Have it diagnosed

Tell us the car, the symptom and your city. A person calls back to say what we can do there and what the diagnosis costs.

  1. 1
  2. 2
  3. 3

No payment now. We confirm the price before work starts.

Before you book

Questions we get asked

If your question is not here, ask it. We would rather answer honestly now than have you find out after booking.

Chat on WhatsAppBook a Mechanic