Mitsubishi Lancer blowing blue smoke
On a Mitsubishi Lancer, this usually comes down to high-mileage wear on an older engine or ring wear from running hot on cng. Below are the causes that fit this car, most likely first, and what fixes each one.
Why a Mitsubishi Lancer is blowing blue smoke
1.3 L petrol · 1.6 L petrol
| Likely cause | How likely | The fix |
|---|---|---|
High-mileage wear on an older engineFits the Lancer Older engines that missed oil changes wear rings and bores, increasing oil consumption. A compression test and oil-use record show the trend. | Common | Engine overhaul |
Ring wear from running hot on CNGFits the Lancer Lean, hot gas running and dry valve seats accelerate wear on some converted engines. A compression test reveals it. | Possible | Piston ring replacement |
Worn piston rings Worn rings let oil past into the combustion chamber, showing as smoke under load. A compression and leak-down test confirm it. | Common | Piston ring replacement |
Worn valve stem seals Hardened seals let oil drip down the valves overnight, giving a puff of smoke at start-up. The pattern points to it. | Common | Cylinder head repair |
Blocked PCV valve A clogged crankcase ventilation valve pushes oil into the intake. Checking the valve and hoses confirms it. | Possible | Engine diagnosis |
Wrong or overfilled oil Overfilling or using too thin an oil increases consumption. Correcting level and grade is the first step. | Possible | Oil change |
Causes marked “Fits the Lancer” apply because of how this car is built: its petrol engine, MANUAL/AUTOMATIC gearbox, timing belt or a CNG conversion.
General guidance based on how these cars are built and how they commonly wear. Your car’s own history matters more than any list, which is why a technician confirms the cause before quoting.
Can you keep driving?
Usually yes, with frequent oil level checks. If oil use is heavy, the oil light comes on, or the catalytic converter starts to clog, have it repaired before longer trips.
Checks you can do first
- Check the oil level weekly and note how much you top up.
- Note when the smoke appears: at start-up, on deceleration, or under acceleration.
- Look for oil wetness around the exhaust tail pipe.
- Check that the oil level is not overfilled above the max mark.
How a technician diagnoses it on a Lancer
Step 1
Record oil consumption over a set distance.
Step 2
Run compression and leak-down tests.
Step 3
Check PCV system and turbo shaft play where fitted.
Step 4
Inspect spark plugs for oil fouling to find the cylinder.
Other Mitsubishi Lancer problems
- Lancer overheatingWidely reported on this model
- Lancer knocking from the suspensionWidely reported on this model
- Lancer leaking oilWidely reported on this model
- Lancer having trouble starting on CNGWidely reported on this model
- Lancer not starting
- Lancer cranking but not starting
- Lancer showing a check engine light
- Lancer vibrating through the steering wheel
- Lancer misfiring
Parts usually involved
Blue smoke from exhaust on other cars
Get your Lancer looked at
Tell us the Mitsubishi Lancer, the symptom and where the car is. A person calls back to say what we can do in your city and what the diagnosis costs.
Before you book
Questions we get asked
If your question is not here, ask it. We would rather answer honestly now than have you find out after booking.



