Nissan Clipper having AGS gearbox problems
Suzuki-based Clippers with AGS share the jerky shifts and clutch wear reported on the Every. Below are the causes that fit a Nissan Clipper, most likely first, and what fixes each one.
Why a Nissan Clipper is having AGS gearbox problems
0.66 L Mitsubishi 3G83 petrol (2003–2013) · 0.66 L Suzuki K6A / R06A petrol (2013–present)
| Likely cause | How likely | The fix |
|---|---|---|
Electro-hydraulic actuator leak on an imported automated manualFits the Clipper Several imported automated manuals use an electro-hydraulic pump and accumulator rather than electric motors; low fluid or a tired pump causes slow shifts and warnings. Pump run-time data and fluid checks confirm it. | Possible | Transmission diagnosis |
Clutch position needs relearning As the clutch wears, the actuator must relearn its position; if not, engagement becomes harsh. A scan tool relearn fixes it. | Common | Transmission diagnosis |
Worn clutch plate The clutch in an AGS wears like a manual, especially in traffic. Slip data and inspection confirm it. | Common | Clutch plate replacement |
Low battery voltage The actuators need good voltage; a weak battery causes erratic behaviour. A battery test rules it out. | Possible | Battery testing |
Old gearbox oil Old oil makes the gears harder to select. Changing the oil helps smoothness. | Possible | Transmission oil change |
Causes marked “Fits the Clipper” apply because of how this car is built: its petrol engine, MANUAL/AUTOMATIC/AGS gearbox, timing chain.
General guidance based on how these cars are built and how they commonly wear. Your car’s own history matters more than any list, which is why a technician confirms the cause before quoting.
Can you keep driving?
Usually yes, if it still selects gears. If it will not engage drive, flashes a warning, or gets stuck in neutral, stop and have it checked.
Checks you can do first
- Note whether jerks happen between particular gears.
- Check for gearbox warning lights or a flashing gear indicator.
- Try lifting off the accelerator slightly during upshifts.
- Check the battery condition; low voltage affects the actuators.
How a technician diagnoses it on a Clipper
Step 1
Scan the transmission module and read actuator data.
Step 2
Run clutch and gear position relearns.
Step 3
Check the battery and charging voltage.
Step 4
Inspect clutch wear and gearbox oil.
Other Nissan Clipper problems
- Clipper overheatingWidely reported on this model
- Clipper knocking from the suspensionWidely reported on this model
- Clipper not starting
- Clipper pulling to one side
- Clipper vibrating through the steering wheel
- Clipper using too much fuel
- Clipper leaking oil
- Clipper draining its battery
- Clipper showing a battery warning light
AGS gearbox problems on other cars
Get your Clipper looked at
Tell us the Nissan Clipper, the symptom and where the car is. A person calls back to say what we can do in your city and what the diagnosis costs.
Before you book
Questions we get asked
If your question is not here, ask it. We would rather answer honestly now than have you find out after booking.



