Mitsubishi Pajero losing power
On a Mitsubishi Pajero, this usually comes down to turbo or boost leak or clogged diesel injectors or egr. Below are the causes that fit this car, most likely first, and what fixes each one.
Why a Mitsubishi Pajero is losing power
2.8 L turbo diesel · 3.2 L turbo diesel · V6 petrol
| Likely cause | How likely | The fix |
|---|---|---|
Turbo or boost leakFits the Pajero A split intercooler hose or worn turbo loses boost and triggers limp mode. Boost readings on a scan confirm it. | Common | Engine diagnosis |
Clogged diesel injectors or EGRFits the Pajero Soot and poor fuel foul diesel injectors and EGR valves, cutting power and adding smoke. Injector balance and EGR checks confirm it. | Common | Fuel injector service |
Transmission slip or limp modeFits the Pajero Worn or overheated CVT and automatic gearboxes slip, so revs rise without speed. Transmission codes and fluid condition show it. | Possible | Transmission diagnosis |
Slipping clutchFits the Pajero On manuals, a worn clutch lets revs climb without the car speeding up. A road test in high gear confirms it. | Possible | Clutch plate replacement |
Clogged air filter Dusty roads choke the filter quickly and starve the engine of air. Visual inspection shows it. | Common | Air filter replacement |
Restricted fuel filter or weak pump Poor fuel quality clogs filters and strains pumps, so power fades under load. Fuel pressure testing confirms it. | Common | Fuel pump replacement |
Blocked catalytic converter A melted or clogged converter restricts the exhaust and power falls at higher revs. Back-pressure testing confirms it. | Possible | Catalytic converter diagnosis |
Faulty oxygen or airflow sensor Wrong sensor readings upset the mixture. Live data and fuel trims show the faulty sensor. | Possible | Sensor testing |
Causes marked “Fits the Pajero” apply because of how this car is built: its diesel/petrol engine, MANUAL/AUTOMATIC gearbox, timing chain.
General guidance based on how these cars are built and how they commonly wear. Your car’s own history matters more than any list, which is why a technician confirms the cause before quoting.
Can you keep driving?
Short gentle trips are usually fine if power loss is mild. If the car is in limp mode, overheating, or the check engine light is flashing, stop and get it checked.
Checks you can do first
- Check whether any warning light is on.
- Check the air filter for heavy dust.
- Note whether the loss is constant or only uphill, hot, or on CNG.
- Check the temperature gauge.
How a technician diagnoses it on a Pajero
Step 1
Scan for codes, limp mode and fuel trims.
Step 2
Check air filter, fuel pressure and, on turbo engines, boost.
Step 3
Test exhaust back-pressure for a blocked converter.
Step 4
Road test to separate engine power loss from transmission or clutch slip.
Other Mitsubishi Pajero problems
- Pajero overheatingWidely reported on this model
- Pajero blowing black smokeWidely reported on this model
- Pajero hard to start (diesel)Widely reported on this model
- Pajero losing turbo boostWidely reported on this model
- Pajero not starting
- Pajero cranking but not starting
- Pajero showing a check engine light
- Pajero vibrating through the steering wheel
- Pajero knocking from the suspension
Parts usually involved
Loss of power on other cars
Get your Pajero looked at
Tell us the Mitsubishi Pajero, the symptom and where the car is. A person calls back to say what we can do in your city and what the diagnosis costs.
Before you book
Questions we get asked
If your question is not here, ask it. We would rather answer honestly now than have you find out after booking.



