Islamabad Car Mechanic — Doorstep & Workshop Auto Repair Services

Engine misfire

A misfire feels like the engine stumbling, shaking at idle or losing power as one cylinder fails to burn its fuel. The usual causes are worn spark plugs, a failing ignition coil or a fuel injector fault. Unburnt fuel can damage the catalytic converter, so get it fixed promptly.

Get it checked soon

Likely causes

Likely causeHow likelyThe fix

Worn spark plugs

Worn electrodes need more voltage to spark and fail under load. Inspecting the plugs shows wear or fouling.

CommonSpark plug replacement

Failing ignition coil

Heat cracks coil insulation. Swapping coils between cylinders and seeing the misfire follow confirms it.

CommonIgnition coil replacement

CNG wears plugs and coils fasterSome cars only

Gas needs a stronger spark than petrol, so plugs and coils wear out sooner and misfire first on CNG. Using the right plug gap for gas helps.

CommonCng kit inspection

Clogged or leaking injector

Dirty fuel blocks injectors and leaves a cylinder lean. Injector balance and spray tests confirm it.

PossibleFuel injector service

Vacuum leak

A cracked hose lets in unmetered air, causing lean misfire at idle. A smoke test finds it.

PossibleEngine diagnosis

Worn distributor cap, rotor or high-tension leadsSome cars only

Older cars with a distributor lose spark through cracked caps and leads, especially in damp weather. Visual inspection and resistance tests find it.

CommonTune up

Low compression or burnt valve

A worn valve or ring leaves one cylinder short of compression. A compression or leak-down test confirms it.

Less commonEngine repair

Valve clearance too tightSome cars only

Engines with adjustable tappets, common on older and small engines, need periodic valve adjustment; tight clearances cause misfire and burnt valves.

PossibleValve adjustment

General guidance based on how these cars are built and how they commonly wear. Your car’s own history matters more than any list, which is why a technician confirms the cause before quoting.

Can you keep driving?

Short, gentle trips are usually possible with a mild misfire. If the check engine light flashes, drive as little as possible and avoid heavy load until it is repaired.

Checks you can do first

  • Note whether the shaking is at idle, under load, or both.
  • Check whether the check engine light is steady or flashing.
  • Note whether it happens only on CNG or only on petrol.
  • Check whether it started after washing the engine or driving through water.

How a technician diagnoses it

  1. Step 1

    Read misfire codes and per-cylinder misfire counters.

  2. Step 2

    Swap coils and plugs between cylinders to see if the misfire moves.

  3. Step 3

    Test injectors and check for vacuum leaks.

  4. Step 4

    Run a compression test if ignition and fuel are fine.

Have it diagnosed

Tell us the car, the symptom and your city. A person calls back to say what we can do there and what the diagnosis costs.

  1. 1
  2. 2
  3. 3

No payment now. We confirm the price before work starts.

Before you book

Questions we get asked

If your question is not here, ask it. We would rather answer honestly now than have you find out after booking.

Chat on WhatsAppBook a Mechanic