Islamabad Car Mechanic — Doorstep & Workshop Auto Repair Services

High fuel consumption

When a car suddenly needs more fuel than usual, the cause is often simple: low tyre pressure, a dirty air filter, worn plugs or a dragging brake. Driving in heavy traffic with the AC on also adds a lot. It is rarely urgent, but fixing it saves money and can uncover a developing fault.

Keep an eye on it

Likely causes

Likely causeHow likelyThe fix

Low tyre pressure

Soft tyres increase rolling resistance. Checking pressures is quick and free.

CommonPuncture repair

Dirty air filter or worn plugs

A clogged filter or weak spark wastes fuel. A tune-up checks both.

CommonTune up

Faulty oxygen sensor or thermostat

A lazy oxygen sensor or a thermostat stuck open keeps the engine running rich. Live data shows it.

PossibleSensor testing

Dragging brakes

A sticking caliper or tight handbrake acts like a constant load. A hot wheel points to it.

PossibleBrake caliper repair

Weak hybrid battery forcing the engine to run moreSome cars only

A worn hybrid battery cannot store much energy, so the engine runs more often. Battery block voltages in live data reveal it.

CommonHybrid battery diagnosis

Old or slipping automatic transmissionSome cars only

Old fluid or worn clutches in an automatic waste power. Fluid condition and slip in live data show it.

PossibleTransmission oil change

Out-of-tune carburettorSome cars only

Older carburetted cars lose economy as jets wear. Cleaning and tuning restores it.

CommonCarburetor repair

Petrol use higher after CNG conversionSome cars only

A converted car running on petrol with a poorly set emulator can use more petrol than before. Checking the kit settings confirms it.

PossibleCng kit inspection

General guidance based on how these cars are built and how they commonly wear. Your car’s own history matters more than any list, which is why a technician confirms the cause before quoting.

Can you keep driving?

Yes. Note any other symptoms, such as smoke, misfires or warning lights, and mention them when you get it checked.

Checks you can do first

  • Measure consumption over two full tanks with the same driving.
  • Check tyre pressures when cold.
  • Check the air filter.
  • Remove unneeded weight from the boot.

How a technician diagnoses it

  1. Step 1

    Confirm consumption with a measured fill-to-fill test.

  2. Step 2

    Scan for codes and review fuel trims and coolant temperature.

  3. Step 3

    Check brakes for drag and tyres for pressure.

  4. Step 4

    On hybrids, check battery state and engine run time.

By car model

Have it diagnosed

Tell us the car, the symptom and your city. A person calls back to say what we can do there and what the diagnosis costs.

  1. 1
  2. 2
  3. 3

No payment now. We confirm the price before work starts.

Before you book

Questions we get asked

If your question is not here, ask it. We would rather answer honestly now than have you find out after booking.

Chat on WhatsAppBook a Mechanic