Honda City hard to shift gears
On a Honda City, this usually comes down to clutch not fully releasing or worn synchronisers. Below are the causes that fit this car, most likely first, and what fixes each one.
Why a Honda City is hard to shift gears
1.3 L L13A i-DSI petrol · 1.3 L L13 i-VTEC petrol · 1.5 L L15 i-VTEC petrol
| Likely cause | How likely | The fix |
|---|---|---|
Clutch not fully releasingFits the City Air in the hydraulics or a worn cable leaves the clutch dragging, so gears grind. Checking pedal travel and hydraulics confirms it. | Common | Clutch cylinder repair |
Worn synchronisersFits the City Synchros smooth gear engagement; worn ones crunch, especially into second. A road test pattern points to it. | Common | Manual gearbox repair |
Worn gear linkage or cablesFits the City Worn bushes in the gear linkage make shifts vague or stiff. Inspection under the car shows play. | Possible | Manual gearbox repair |
Low or old gearbox oil Old oil thickens or thins and makes shifting stiff. Checking the level and condition is a simple first step. | Possible | Transmission oil change |
Engine or gearbox mounts worn Worn mounts let the engine move, pulling on the linkage. Watching engine movement while shifting shows it. | Possible | Engine mount replacement |
Worn clutch release bearing A noisy or failing release bearing may not fully disengage the clutch. Noise when the pedal is pressed is a clue. | Possible | Clutch bearing replacement |
Causes marked “Fits the City” apply because of how this car is built: its petrol engine, MANUAL/AUTOMATIC/CVT gearbox, timing chain or a CNG conversion.
General guidance based on how these cars are built and how they commonly wear. Your car’s own history matters more than any list, which is why a technician confirms the cause before quoting.
Can you keep driving?
Yes, carefully, if you can still select gears. If gears jump out or cannot be selected, do not drive; you may be stuck in gear or lose drive.
Checks you can do first
- Note whether it is hard to select gears with the engine off as well as running.
- Check whether grinding happens in one gear or all.
- Check the clutch fluid reservoir level on a hydraulic clutch.
- Look for gearbox oil leaks under the car.
How a technician diagnoses it on a City
Step 1
Road-test shifting through all gears, hot and cold.
Step 2
Check clutch hydraulics and release.
Step 3
Inspect linkage, mounts and oil level.
Step 4
Scan the AGS module and run a calibration where applicable.
Other Honda City problems
- City AC not coolingWidely reported on this model
- City knocking from the suspensionWidely reported on this model
- City misfiringWidely reported on this model
- City juddering or whining from the CVTWidely reported on this model
- City not starting
- City cranking but not starting
- City showing a check engine light
- City squeaking when braking
- City having a soft brake pedal
Parts usually involved
Hard gear shifting on other cars
Get your City looked at
Tell us the Honda City, the symptom and where the car is. A person calls back to say what we can do in your city and what the diagnosis costs.
Before you book
Questions we get asked
If your question is not here, ask it. We would rather answer honestly now than have you find out after booking.



