Honda City losing power
On a Honda City, this usually comes down to lower power on cng or transmission slip or limp mode. Below are the causes that fit this car, most likely first, and what fixes each one.
Why a Honda City is losing power
1.3 L L13A i-DSI petrol · 1.3 L L13 i-VTEC petrol · 1.5 L L15 i-VTEC petrol
| Likely cause | How likely | The fix |
|---|---|---|
Lower power on CNGFits the City Engines produce less power on CNG; low cylinder pressure, a worn reducer or wrong timing advance make it worse. Comparing petrol and CNG performance shows it. | Common | Cng kit inspection |
Transmission slip or limp modeFits the City Worn or overheated CVT and automatic gearboxes slip, so revs rise without speed. Transmission codes and fluid condition show it. | Possible | Transmission diagnosis |
Slipping clutchFits the City On manuals, a worn clutch lets revs climb without the car speeding up. A road test in high gear confirms it. | Possible | Clutch plate replacement |
Clogged air filter Dusty roads choke the filter quickly and starve the engine of air. Visual inspection shows it. | Common | Air filter replacement |
Restricted fuel filter or weak pump Poor fuel quality clogs filters and strains pumps, so power fades under load. Fuel pressure testing confirms it. | Common | Fuel pump replacement |
Blocked catalytic converter A melted or clogged converter restricts the exhaust and power falls at higher revs. Back-pressure testing confirms it. | Possible | Catalytic converter diagnosis |
Faulty oxygen or airflow sensor Wrong sensor readings upset the mixture. Live data and fuel trims show the faulty sensor. | Possible | Sensor testing |
Causes marked “Fits the City” apply because of how this car is built: its petrol engine, MANUAL/AUTOMATIC/CVT gearbox, timing chain or a CNG conversion.
General guidance based on how these cars are built and how they commonly wear. Your car’s own history matters more than any list, which is why a technician confirms the cause before quoting.
Can you keep driving?
Short gentle trips are usually fine if power loss is mild. If the car is in limp mode, overheating, or the check engine light is flashing, stop and get it checked.
Checks you can do first
- Check whether any warning light is on.
- Check the air filter for heavy dust.
- Note whether the loss is constant or only uphill, hot, or on CNG.
- Check the temperature gauge.
How a technician diagnoses it on a City
Step 1
Scan for codes, limp mode and fuel trims.
Step 2
Check air filter, fuel pressure and, on turbo engines, boost.
Step 3
Test exhaust back-pressure for a blocked converter.
Step 4
Road test to separate engine power loss from transmission or clutch slip.
Other Honda City problems
- City AC not coolingWidely reported on this model
- City knocking from the suspensionWidely reported on this model
- City misfiringWidely reported on this model
- City juddering or whining from the CVTWidely reported on this model
- City not starting
- City cranking but not starting
- City showing a check engine light
- City squeaking when braking
- City having a soft brake pedal
Parts usually involved
Loss of power on other cars
Get your City looked at
Tell us the Honda City, the symptom and where the car is. A person calls back to say what we can do in your city and what the diagnosis costs.
Before you book
Questions we get asked
If your question is not here, ask it. We would rather answer honestly now than have you find out after booking.



