Honda City vibrating through the steering wheel
On a Honda City, this usually comes down to worn tie-rod ends or ball joints or worn inner cv joint. Below are the causes that fit this car, most likely first, and what fixes each one.
Why a Honda City is vibrating through the steering wheel
1.3 L L13A i-DSI petrol · 1.3 L L13 i-VTEC petrol · 1.5 L L15 i-VTEC petrol
| Likely cause | How likely | The fix |
|---|---|---|
Worn tie-rod ends or ball jointsFits the City Play in steering joints lets the wheel shimmy. A check for movement with the wheel off the ground finds it. | Possible | Tie rod replacement |
Worn inner CV jointFits the City On front-wheel-drive cars, a worn inner CV joint causes vibration under acceleration that eases when coasting. Torn boots and grease spray are clues. | Possible | Cv joint replacement |
Wheel out of balance A lost weight or uneven tyre wear causes shake usually between 80 and 110 km/h. Spin-balancing confirms it. | Common | Wheel balancing |
Bent rim from a pothole A rim bent by a pothole or speed breaker cannot be balanced out. It shows as runout on the balancing machine. | Common | Rim repair |
Warped or uneven brake discs Discs with uneven thickness pulse the pedal and shake the wheel under braking. Measuring runout and thickness variation confirms it. | Common | Brake disc replacement |
Separated tyre belt Internal belt damage creates a bump in the tread that shakes at low speed too. It needs replacement, not balancing. | Less common | Tire replacement |
Causes marked “Fits the City” apply because of how this car is built: its petrol engine, MANUAL/AUTOMATIC/CVT gearbox, timing chain or a CNG conversion.
General guidance based on how these cars are built and how they commonly wear. Your car’s own history matters more than any list, which is why a technician confirms the cause before quoting.
Can you keep driving?
Generally yes at moderate speeds. If the vibration is severe, sudden, or came after hitting something, check the wheel nuts and tyre for a bulge before continuing.
Checks you can do first
- Note the speed range where it shakes and whether it is worse when braking.
- Look at each tyre sidewall for bulges or cuts.
- Check the inner rim edges for dents from potholes.
- Check that no wheel balance weights are missing (clean marks on the rim).
How a technician diagnoses it on a City
Step 1
Balance all four wheels and check rim runout.
Step 2
Measure brake disc runout and thickness.
Step 3
Inspect steering joints and CV joints for play.
Step 4
Road-test to confirm the speed range is cured.
Other Honda City problems
- City AC not coolingWidely reported on this model
- City knocking from the suspensionWidely reported on this model
- City misfiringWidely reported on this model
- City juddering or whining from the CVTWidely reported on this model
- City not starting
- City cranking but not starting
- City showing a check engine light
- City squeaking when braking
- City having a soft brake pedal
Parts usually involved
Steering wheel vibration on other cars
Get your City looked at
Tell us the Honda City, the symptom and where the car is. A person calls back to say what we can do in your city and what the diagnosis costs.
Before you book
Questions we get asked
If your question is not here, ask it. We would rather answer honestly now than have you find out after booking.



